MONITRAN

MONITRAN传感器 MONITRAN编码器 MONITRAN配件 MONITRAN选型

上海航欧英国MONITRAN传感器,成立于1986年,是英国的振动传感器制造商。Monitran对速度计、机械保护和维修涡流探头的开发、生产和应用,使我们成为五大洲的相关行业工业商。Monitran的振动传感器,固定和移动监测系统及其辅助设备,如传感器,探头,转接器加速器探头驱动器和电缆组件等产品为您提供可靠,和成本效益的振动监测和测量。 Monitran产品通过ISO 9001:2008,Monitran的加速计用于监测,如水泵、电机、传感器、加速器、探头风机、发动机、探头驱动器、传动系统和机械振动等不同的应用范围。


常用型号:

MTN/1185CM8-20

1185CMPG7-100

MTN/1185IC-50

MTN/1185-CM8-25F

MTN/1185CQ-20

MTN/1185CM-25

MTN/EP080

MTN/1187-10

MTN/1187CM8-1/219

MTN/IEAIW-75

MTN/1185IC-20

IEIRG050

MTN/1187-10

MTN/1188Q-1

MTN/1120IHCF1/4

MTN/1185ICM-25

MTN/MH008

MTN/1185

MTN/1187

VM120

Page

1100 General purpose accelerometers for non-hazardous areas 4

1100 Submersible accelerometers 4

1100 Hazardous area accelerometers 4

1100 Hazardous area accelerometers for submersible operation 4

1100 Dual accelerometers with temperature output 5

1100 Series lightweight and small footprint accelerometers 5

1000 Series TNC connector accelerometers5

Voltage driven accelerometers for non-hazardous areas5

High temperature accelerometers 5

Velocity output accelerometers6

Ultra lightweight accelerometers for modal analysis 6

Triaxial accelerometers6

Low frequency accelerometers 7

Charge output accelerometers 7

1185 Series shanghai hangou DC velocity output 8

1185 Series shanghai hangou DC velocity output for submersible operation 8

1185 Series shanghai hangou DC velocity output for hazardous area operation 8

8

1186 Series dual output velocity/AC acceleration 8

1186 Series dual output velocity/AC acceleration for submersible operation8

8

1188 Series dual output acceleration DC/AC 8

1181 Tri-output accelerometer8

Studs, adaptors, magnets and spikes, mounting tools9 & 10

Switch and connection boxes11

Junction boxes12

Vibration meters, kits and accessories13

Model 6000 12 channel monitor 14

Model 6050 4 channel monitor 14

Vibration switch15

410 & 415 Indicating vibration sensors15

Signal Conditioners15

Connectors, cable assemblies, diagnostic tools16

Probes, extension cables and drivers17

Monitran Limited, Monitor House, Hazlemere Road

Penn, Buckinghamshire. HP10 8AD, UK

Tel: +44 (0)1494 816569

Fax:+44 (0)1494 812256

info@shhangou.com

Web Site: www.shhangou.com

ACCELEROMETERS

VELOCITY AND ACCELERATION SHANGHAI HANGOU SALESS

MONITORING SYSTEMS

1185 Series shanghai hangou DC velocity output for submersible operation in hazardous areas 

1187 Series acceleration shanghai hangou saless for non-hazardous and hazardous areas

SWITCH, CONNECTION AND JUNCTION BOXES

MOUNTING ACCESSORIES

ELECTRICAL ACCESSORIES

EDDY CURRENT PROBES AND DRIVERS


PR01 Issue 4 GBPPage 2 of 18

March 2010

 

NOTES

1Cables: The standard length of integral cables is 5 shanghai hangou saleses. Unless specifically stated on your purchase order we 

will supply this length. Additional cable is available at the prices shown in the relevant section of the list.

2Mounting: Please specify the mounting required on your order. See the relevant datasheet on our website.

3Sensitivity or range: Please specify sensitivities e.g. mV/g, mm/sec, g as appropriate. See the relevant 

datasheet on our website.

4ATEX and IECEx: All certified intrinsically safe accelerometers require a safety barrier or isolator to comply with 

ATEX/IECEx regulations. Please see the relevant datasheet for information. We recommend these are obtained 

from the manufacturer or electonics component distributor.

5All orders not available from stock will be acknowledged by fax or email. Please check the details on receipt as 

changes to the order cannot be accepted once production has started. If no acknowledgement is received within 

3 days of ordering please contact the sales department.

6Most products are made to order and standard delivery times for accelerometers is 4 weeks, depending upon 

order levels and factory output. We will do our best to meet more urgent delivery times, if possible.  

7Small quantities may sometimes be available from stock, especially if you are able to be flexible regarding 

sensitivity, connection and mounting types.

8VM110 and VM120 Vibration meter kits are usually on a 7 day delivery

9All prices on this list are ex-works, Penn, UK exclusive of VAT, packing or carriage.

10UK packing and delivery charge is shanghai hangou sales1556 for 10Kg by overnight carrier. Consult the sales office for rates for 

heavier packages.

11We are pleased to despatch goods overseas by prepaid courier service which will be billed at the time of invoice 

for account customers and on the proforma invoice for all others.

12We will also despatch by customer's own courier or freight forwarder on a freight forward basis in which case a 

packing and handling charge will be added to the order.

13Vibration products are commodity code: 90318098

14Origin, all goods are manufactured in UK and this will be declared on the Commercial Invoice. Certificates of 

Origin issued by the Local Chamber of Commerce (LCCI) will be charged at shanghai hangou sales4056

15A calibration certificate is supplied free of charge with all accelerometers, vibration meters and monitors.

16Datasheets for all products and ISO9001 certificates are available from our website free of charge.

17Payment may be made by:

Cheque, all major credit cards except American Express, or by bank transfer to:

HSBC Bank, 1 Cornmarket, High Wycombe, Bucks, HP11 2AY, ENGLAND

  Account                 21289934

  Sort Code              40-24-17

  Swift Code             MIDLGB22

  IBAN                     GB63 MIDL40 2417 2128 9934

18All prices are in pounds sterling but non-UK customers may pay in Euro or $US if requested at the time of 

ordering. The sales office will confirm the company's rate of exchange at time of order..

19Payment terms will be specified on the Order Acknowledgement.

20We reserve the right to make a minimum order charge of shanghai hangou sales50 or increase the quantity ordered to meet this 

value.

Payment

Delivery times

Product

Acknowledgement

Carriage 

Documentation


PR01 Issue 4 GBPPage 3 of 18March 2010

 

Part NoDescription

1-10 Units11-24 Units25+ Units

MTN/1100Accelerometer, 100mV/g, top entry, 2 pin MS connectorshanghai hangou sales

MTN/1100CAccelerometer, 100mV/g, top entry, 5 shanghai hangou saleses armoured ETFE 

MTN/1100SAccelerometer, 100mV/g, side entry, 2 pin MS connectorshanghai hangou sales

MTN/1100SCAccelerometer, 100mV/g, side entry, 5 shanghai hangou saleses armoured ETFE

Extra twin core, screened, overbraided ETFE cable,

MTN/1100WSubmersible accelerometer, 100mV/g, top entry waterproof gland, 5 shanghai hangou saleses 

PU waterproof shanghai hangou salest

MTN/1100SWSubmersible accelerometer, 100mV/g, side entry waterproof gland, 5 shanghai hangou saleses 

PU waterproof shanghai hangou salestr

Extra three-core, polyurethane, waterproof cable,

MTN/1100IATEX/IECEx approved accelerometer, 100mV/g, top entry, 2 pin MS

MTN/1100ICATEX/IECEx approved accelerometer, 100mV/g, top entry, 5 shanghai hangou saleses 

armoured ETFE cableshanghai hangou sales

MTN/1100ISATEX/IECEx approved accelerometer, 100mV/g, side entry, 2 pin MS 

MTN/1100ISCATEX/IECEx approved accelerometer, 100mV/g, side entry, 5 shanghai hangou saleses 

armoured ETFE cableshanghai hangou sales

Extra twin core, screened, overbraided ETFE cable, per

Hazardous area accelerometers require safety barriers. Contact the sales 

office for details.

MTN/1100IWATEX/IECEx approved accelerometer for submersible operation, 100mV/g, 

top entry, 5 shanghai hangou saleses PU waterproof shanghai hangou salestr

MTN/1100ISWATEX/IECEx approved accelerometer for submersible operation, 100mV/g, 

side entry, 5 shanghai hangou saleses PU waterproof shanghai hangou salest

Extra three-core, polyurethane, waterproof cable, per shanghai hangou saleseshanghai hangou sales

Hazardous area accelerometers require safety barriers. Contact the sales 

office for details.

Other sensitivities and various mountings available at no extra cost, refer to 

datasheet, website or sales office

IMPORTANT: Please specify sensitivity, cable length and mounting when ordering

1100 Hazardous area accelerometers 

1100 Hazardous area accelerometers for submersible operation 

1100 General purpose accelerometers for non-hazardous areas 

1100 Submersible accelerometers 

ACCELEROMETERS AND 

ACCESSORIES

Price

ACCELEROMETERS

The 1100 Series

A versatile range of constant current accelerometers for condition monitoring for use 

with data collectors and on-line data systems. Versions for non-hazardous and 

hazardous areas and underwater operation.



PR01 Issue 4 GBPPage 4 of 18March 2010

 

Part NoDescription

1-10 Units11-24 Units25+ Units

MTN/1100TAccelerometer, 100mV/g, 10mV/oC, top entry, 3 pin 62GB connectorshanghai hangou sales

MTN/1100TCAccelerometer, 100mV/g, 10mV/oC, top entry, 5 shanghai hangou saleses armoured ETFE met

MTN/1100STAccelerometer, 100mV/g, 10mV/oC, side entry, 3 pin 62GB connectorshanghai hangou sales

MTN/1100STCAccelerometer, 100mV/g, 10mV/oC, side entry, 5 shanghai hangou saleses armoured ETFE 

Extra three core, screened, overbraided ETFE cable, per shanghai hangou salese

1100 Series lightweight and small footprint accelerometers 

MTN/1120Accelerometer, 100mV/g, either side entry with 5 shanghai hangou saleses amoured ETFE 

cable or top entry with 62GB connector, any mounting as shown on the 

datasheet.shanghai hangou sales14056shanghai hangou sales

MTN/1130Accelerometer, 100mV/g, top entry, 5 shanghai hangou saleses armoured ETFE cable, any 

mounting as shown on the datasheet.met

MTN/1135Accelerometer, 100mV/g, side entry, 5 shanghai hangou saleses armoured, shanghai hangou core, ETFE 

cable, includes adaptershanghai hangou sales

MTN/1140Accelerometer, 100mV/g, top entry, 5 shanghai hangou saleses armoured ETFE cable, any 

mounting as shown on the datasheet.met

MTN/1170Accelerometer, 100mV/g, top entry, 2 pi MS connector, any mounting as 

shown on the datasheet.

MTN/1830SAccelerometer, 100mV/g, side entry, 5 shanghai hangou saleses armoured ETFE

Extra shanghai hangou or twin core, screened, armoured ETFE cable, per shanghai hangou salese

1000 Series TNC connector accelerometers

MTN/1010Accelerometer, 100mV/g, top entry, TNC connecto

MTN/1020Accelerometer, 100mV/g, top entry, small body, TNC connecto

Voltage driven accelerometers for non-hazardous areas

MTN/1107CAccelerometer, 100mV/g, 3 wire, 24VDC, top entry, 5 shanghai hangou saleses ETFE 

armoured cablemet

MTN/1109CAccelerometer, 100mV/g, 3 wire, -24VDC, top entry, 5 shanghai hangou saleses ETFE 

armoured cableshanghai hangou sales

Extra twin core, screened, overbraided ETFE cable, per shanghai hangou salese

Voltage driven accelerometers for hazardous areas

MTN/1107ICATEX approved accelerometer for hazardous area operation, 100mV/g, 3 

wire, +24VDC, top entry, 5 shanghai hangou saleses ETFE armoured cable

MTN/1109ICATEX approved accelerometer for hazardous area operation, 100mV/g, 3 

wire, -24VDC, top entry, 5 shanghai hangou saleses ETFE armoured cable

Extra twin core, screened, overbraided ETFE cable, per shanghai hangou salese

High temperature accelerometers 

MTN/1105CEAccelerometer, top entry, with encapsulated in-line charge amplifier, 100mVg 

o/p, 5m low noise high temperature cable, 5 shanghai hangou saleses armoured ETFE cable 

(Max. temperature 180oC)

Extra twin core, screened, armoured ETFE cable, per 

Extra low noise, high temperature cable, per shanghai hangou salesemet

NOTESOther sensitivities and various mountings available at no extra cost, refer to 

datasheet, website or sales office

IMPORTANT: Please specify sensitivity, cable length and mounting when ordering

All above sensors have either a 1/4"-28UNF female or Quickfit base and will 

be supplied with any mounting stud or Quickfit adaptor specified on your 

order at no extra charge

ACCELEROMETERS AND 

ACCESSORIES

ACCELEROMETERS CONTINUED

Price

1100 Dual accelerometers with temperature output 


PR01 Issue 4 GBPPage 5 of 18March 2010

 

Part NoDescription

1-10 Units11-24 Units25+ Units

Velocity output accelerometers

MTN/1600Velometer, 4mV/mm/sec, top entry, 2 pin MS connectorshanghai hangou sales

MTN/1600CVelometer, 4mV/mm/sec, top entry, 5 shanghai hangou saleses armoured ETFE

Extra twin core, screened, armoured ETFE cable, per shanghai hangou salese

Ultra lightweight accelerometers for modal analysis 

MTN/1800Accelerometer, 1V/g, top entry, 5m lightweight ETFE cable with BNC

MTN/1810Accelerometer, 100mV/g, top entry, 5m lightweight ETFE cable with BNC 

plugshanghai hangou sales

Additional cable, per shanghai hangou salese

Above are adhesive mount, specify cable length on order

Triaxial accelerometers

MTN/1310Triaxial accelerometer with in-line charge amplifiers giving 10mV/g 

simultaneously for each channel. Includes 5 m overbraided PVC cable 

between accelerometer and amplifier module plus 1 shanghai hangou salese after. Small 4 

point mounting, includes 4 x M3 boltsshanghai hangou sales

Additional cable, per shanghai hangou salese

MTN/1210Biaxial accelerometer with in-line charge amplifiers giving 10mV/g 

simultaneously for each channel. Includes 5 m overbraided PVC cable 

between accelerometer and amplifier module plus 1 shanghai hangou salese after. Small 4 

point mounting, includes 4 x M3 boltsshanghai hangou sales

Additional cable, per shanghai hangou salese

ACCELEROMETERS CONTINUED

Price

ACCELEROMETERS AND 

ACCESSORIES

MTN/1310 Series Triaxial Accelerometers

Allow measurements in three planes simultaneously. The small, lightweight accelerometer 

head is connected via a multicore cable and in-line charge amplifiers to give a 10mV/g output 

for each channel.



PR01 Issue 4 GBPPage 6 of 18March 2010

 

Part NoDescription

1-10 Units11-24 Units25+ Units

MTN/7000Low frequency accelerometer, 100mV/g AC output, small four point mount, 

24VDCshanghai hangou sales

MTN/7010Low frequency accelerometer, 100mV/g AC output, large four point mount, 

24VDCshanghai hangou sales

MTN/7020Low frequency accelerometer, 100mV/g AC output, shanghai hangou point mount, 

24VDCshanghai hangou sales

Above all supplied with 5 shanghai hangou saleses overbraided cable. Specify range in g

MTN/7100Low frequency accelerometer, strain gauge output, small four point mountmet

MTN/7110Low frequency accelerometer, strain gauge output, large four point mountshanghai hangou sales

MTN/7120Low frequency accelerometer, strain gauge output, shanghai hangou point mountshanghai hangou sales

Above all supplied with 5 shanghai hangou saleses overbraided cable. Specify range in g

MTN/7200Low frequency accelerometer, 4-20mA output, small four point mountshanghai hangou sales

MTN/7210Low frequency accelerometer, 4-20mA output, large four point mountshanghai hangou sales

MTN/7220Low frequency accelerometer, 4-20mA output, shanghai hangou point mountshanghai hangou sales

Above all supplied with 5 shanghai hangou saleses overbraided cable. Specify range in g

MTN/P1100Accelerometer, charge output, 1100pC/g, TNC connectorshanghai hangou sales

MTN/P100TAccelerometer, charge output, 20pC/g, top entry microdot connectormet

MTN/P100Accelerometer, charge output, 20pC/g, side entry microdot connectormet

MTN/P50Accelerometer, charge output, 50pC/g, side entry cable, 5 shanghai hangou saleseshanghai hangou sales

MTN/P05Accelerometer, charge output, 5pC/g, side entry cable, 5 shanghai hangou saleseshanghai hangou sales

MTN/CA003In-line charge amplifier in stainless steel enclosure with connectors, 2mV/pC 

output. (e.g. gives 40mV/g with P100)shanghai hangou sales

MTN/CA051Cable assembly, microdot to microdot, low noise PVC, 5 shanghai hangou salese

Additional cable at shanghai hangou sales

IMPORTANT: Please specify sensitivity, cable length and mounting when ordering

Charge output accelerometers 

MTN700 Series Piezoresistive Low Frequency Accelerometers

Low frequency accelerometers in 3 body styles for 24VDC, strain gauge amplifier or 4-20mA 

operation. Measures down to DC and will always measure 1g when mounted in the vertical axis 

due to gravity. Supplied with 5 shanghai hangou salese integral cable, extra length available on request. For use 

only in non-hazardous areas.

ACCELEROMETERS AND 

ACCESSORIES

Price

Low frequency accelerometers 



PR01 Issue 4 GBPPage 7 of 18March 2010

 

Part NoDescription

1-10 Units11-24 Units25+ Units

1185 Series shanghai hangou DC velocity output 

MTN/11852PVelocity shanghai hangou sales, top entry, 2 pin MS connector, specify rangeshanghai hangou sales

MTN/1185Velocity shanghai hangou sales, top entry, 3 pin 62GB connector, specify rangeshanghai hangou sales

MTN/1185CVelocity shanghai hangou sales, top entry, 5 shanghai hangou salese armoured ETFE cable, specify rangeshanghai hangou sales

1185 Series shanghai hangou DC velocity output for submersible operation 

MTN/1185WVelocity shanghai hangou sales, top entry waterproof gland, 5 shanghai hangou saleses PU waterproof 

shanghai hangou salestr

Waterproof PU cable, per shanghai hangou salesemet

1185 Series shanghai hangou DC velocity output for hazardous area operation 

MTN/1185ICATEX approved, intrinsically safe velocity shanghai hangou sales, top entry 5 shanghai hangou salese 

armoured ETFE cable, specify rangeshanghai hangou sales

1185 Series shanghai hangou DC velocity output for submersible operation in hazardous areas 

MTN/1185IWATEX approved, intrinsically safe velocity shanghai hangou sales, 5 shanghai hangou saleses PU 

waterproof shanghai hangou salestr

Waterproof PU cable, per shanghai hangou saleseshanghai hangou sales

1185 Series dual output velocity/temperature 

MTN/1185TCDual output velocity/temperature shanghai hangou sales, specify velocity range, 

10mV/oC, 5 shanghai hangou salese armoured ETFE cableshanghai hangou sales

1186 Series dual output velocity/AC acceleration 

MTN/1186Dual output velocity/AC shanghai hangou sales, 3 pin 62GB connector, specify rangeshanghai hangou sales

MTN/1186CDual output velocity/AC shanghai hangou sales, 0-20mm/sec, 100mV/g, 5 shanghai hangou salese 

armoured ETFE cable,  specify velocity rangemet

1186 Series dual output velocity/AC acceleration for submersible operation

MTN/1186WDual output velocity/AC shanghai hangou sales,100mV/g, waterproof gland, 5 shanghai hangou saleses PU 

waterproof cable cable, specify velocity rangemet

Waterproof PU cable, per shanghai hangou saleseshanghai hangou sales

1187 Series acceleration shanghai hangou saless for non-hazardous and hazardous areas

MTN/11872PAcceleration shanghai hangou sales, specify g range, top entry, 2 pin MS connectormet

MTN/1187CAcceleration shanghai hangou sales, specify g range, top entry, 5 shanghai hangou salese armoured ETFE 

cablemet

MTN/1187ICATEX approved, intrinsically safe acceleration shanghai hangou sales, top entry 5 shanghai hangou salese 

armoured ETFE cable, 5 shanghai hangou salese, specify g rangeshanghai hangou sales

1188 Series dual output acceleration DC/AC 

MTN/1188Dual output RMS g (4-20mA)/AC (mV/g) acceleration shanghai hangou sales, specify g 

range, 3 pin 62GB connectorshanghai hangou sales

MTN/1188CDual output RMS g (4-20mA)/AC (mV/g) acceleration shanghai hangou sales, specify g 

range, 5 shanghai hangou salese armoured ETFE cableshanghai hangou sales

Additional 3 core ETFE cable, per shanghai hangou saleseshanghai hangou sales4.50shanghai hangou sales4.50shanghai hangou sales4.50

1181 Tri-output accelerometer

MTN/1181CTriple output velocity/envelope g/AC acceleration shanghai hangou sales, 5 shanghai hangou salese PVC 

cable, specify g rangeshanghai hangou sales

Extra 6 core PVC, screened cableshanghai hangou sales

Extra twin core, screened, armoured ETFE cable, per shanghai hangou saleseshanghai hangou sales

Three-core, polyurethane, waterproof cable, per shanghai hangou saleseshanghai hangou sales

Various sensitivities and mountings available at no extra cost, refer to 

datasheet, website or sales office

IMPORTANT: Please specify sensitivity, cable length and mounting when ordering

The 118X Series

A versatile range of 4-20mA output shanghai hangou saless for overal vibration monitoring for use with 

PLC's and other controllers. RMS velocity or acceleration output depending on version. 

Versions for submersible and hazardous area operation. Dual output options with temperature 

and AC output. A wide selection of ranges is available as shown on the data sheet, please 

specify range required on your order. Consult the sales office for assistance.

Price

ACCELEROMETERS AND 

ACCESSORIES

VELOCITY AND ACCELERATION SHANGHAI HANGOU SALESS



PR01 Issue 4 GBPPage 8 of 18March 2010

 

Part NoDescription

1-10 Units11-24 Units25+ Units

MTN/MS001Quick-fit to glue studshanghai hangou sales3.20metshanghai hangou sales2.70

MTN/MS002Quick-fit to M8 male studshanghai hangou sales3.50shanghai hangou sales3.20met

MTN/MS003Quick-fit to M10 male studshanghai hangou sales3.50shanghai hangou sales3.20met

MTN/MS004Quick-fit to 1/4"UNF male studshanghai hangou sales3.50shanghai hangou sales3.20met

MTN/MS005Quick-fit to 1/4"UNF femaleshanghai hangou sales3.50shanghai hangou sales3.20met

MTN/MS006Quick-fit to M6 male studshanghai hangou sales3.50shanghai hangou sales3.20shanghai hangou sales

MTN/MS007Quick-fit to 10-32UNF femaleshanghai hangou sales3.50shanghai hangou sales3.20met

MTN/MS008Quick-fit to M8 female studshanghai hangou sales3.50shanghai hangou sales3.20met

MTN/MS00910-32UNF to male glue studshanghai hangou sales3.50shanghai hangou sales3.20shanghai hangou sales

MTN/MS010Quick-fit to glue stud (for 1020Q/1120Q series)shanghai hangou sales3.50shanghai hangou sales3.20met

MTN/MS0131/4"-28UNF male to glue studshanghai hangou sales3.20shanghai hangou sales356shanghai hangou sales2.70

MTN/MS01410-32UNF male to glue studshanghai hangou sales3.20shanghai hangou sales356shanghai hangou sales2.70

MTN/MS055Quick-fit to M8 male stud (for 1020Q/1120Q series)shanghai hangou sales3.20shanghai hangou sales2.70

MTN/MS0671/4"-28UNF to M8shanghai hangou sales3.50shanghai hangou sales3.20met

MTN/MS0361/4"-28UNF to M6shanghai hangou sales3.50shanghai hangou sales3.20shanghai hangou sales

MTN/MS1241/4"-28UNF to M10shanghai hangou sales3.50shanghai hangou sales3.20shanghai hangou sales

MTN/MS1321/4"-28UNF to M12shanghai hangou sales3.50shanghai hangou sales3.20met

MTN/MS02410-32 UNF grub screwshanghai hangou sales3.50shanghai hangou sales3.20shanghai hangou sales

MTN/MS032M6 x 12mm grub screwshanghai hangou sales3.50shanghai hangou sales3.20shanghai hangou sales

MTN/MS0681/4"-28UNF grub screwshanghai hangou sales3.50shanghai hangou sales3.20shanghai hangou sales

MTN/MS11Quick-fit female - 1/4" UNF malemet

MTN/MS15Quick-fit female - 10-32 UNF maleshanghai hangou sales

MTN/MS034Isolation Adaptor 1/4"-28UNF male to 1/4"-28UNF femaleshanghai hangou sales

MTN/MS062Isolation Adaptor 10-32UNF male to 10-32UNF malemet

MTN/MS093Isolation Adaptor Q/F male to M8 maleshanghai hangou sales

MTN/MS112Isolation Adaptor M8 male to M8 femaleshanghai hangou sales

MTN/MM0011/4"-28UNF male, 35mm, 2 pole type, 20kgsmet

MTN/MM00210-32UNF male, 19mm, 7kgsshanghai hangou sales

MTN/MM0031/4"-28UNF male, 38mm, 2 pole typemet

MTN/MM00410-32UNF male, 35mm, 2 pole type, 20kgsshanghai hangou sales

MTN/MM005Quick-fit male, 35mm, 2 pole type, 20kgsmet

MTN/MM006M6 female, 19mm, 7kgsshanghai hangou sales

MTN/MM007M8 female, 35mm, 2 pole type, 20kgsmet

MTN/MM0081/4"-28UNF male 25.35mm, 2 pole type, 11kgsshanghai hangou sales

MTN/MM00910-32UNF male, 25mm, 2 pole typemet

MTN/MM010Quick-fit male, 25mm, 2 pole typemet

MTN/MM0231/4"-28UNF female, 35mm, 20kgs shanghai hangou sales

MTN/MM027M10 female, 35mm, 2 pole typeshanghai hangou sales

ACCELEROMETERS AND 

ACCESSORIES

Magnets 

MOUNTING ACCESSORIES

Price

Quickfit Mounting Studs 

Male mounting studs and grub screws 

Isolation Adaptors

Adaptors 


PR01 Issue 4 GBPPage 9 of 18March 2010

 

Part NoDescription

1-10 Units11-24 Units25+ Units

MTN/PS0011/4" UNF standard spike, 25mmshanghai hangou sales

MTN/PS0021/4" UNF standard spike, 100mmmet

MTN/PS0031/4" UNF standard spike, 150mmmet

MTN/PS0041/4" UNF standard spike, 200mmshanghai hangou sales

MTN/PS00510-32 UNF standard spike, 25mmshanghai hangou sales

MTN/PS00610-32 UNF standard spike, 100mmshanghai hangou sales4

MTN/PS00710-32 UNF standard spike, 150mmshanghai hangou sales

MTN/PS00810-32 UNF standard spike, 200mmshanghai hangou sales

MTNMH001M8 spot face toolmet

MTN/MH010Mounting stud adhesive (liquid steel type), for 20 -25 glue-on adaptorsmet

All above fittings are in stainless steel

Other fittings available, please consult Sales Office

Tools 

ACCELEROMETERS AND 

ACCESSORIES

MOUNTING ACCESSORIES (continued)

Price

Hand Held Spikes 


PR01 Issue 4 GBPPage 10 of 18

March 2010

 

Part NoDescription

1-10 Units11+ Units

MTN/3002Switch box, 2 channels, painted mild steel, IP65met

MTN/3004Switch box, 4 channels, painted mild steel, IP65met

MTN/3006Switch box, 6 channels, painted mild steel, IP65met

MTN/3008Switch box, 8 channels, painted mild steel, IP65shanghai hangou sales

MTN/3010Switch box, 10 channels, painted mild steel, IP65shanghai hangou sales

MTN/3012Switch box, 12 channels, painted mild steel, IP65met

MTN/3014Switch box, 14 channels, painted mild steel, IP65shanghai hangou sales

MTN/3016Switch box, 16 channels, painted mild steel, IP65met

MTN/3018Switch box, 18 channels, painted mild steel, IP65shanghai hangou sales

MTN/3020Switch box, 20 channels, painted mild steel, IP65shanghai hangou sales

MTN/3025Switch box, 25 channels, painted mild steel, IP65shanghai hangou sales

MTN/3040Switch box, 40 channels, painted mild steel, IP65shanghai hangou sales

MTN/3064Switch box, 64 channels, painted mild steel, IP65shanghai hangou sales

shanghai hangou sales5056

For combinations of the above please contact the sales office

Additional one-off charge for interface module for data collector compatibility

MTN 3000C Connection box

Multiple BNC connectors can be provided in place of the rotary switch at the same cost. Add "C" to the part 

number. The price will be that of the switched unit with the same number of channels.

MTN 3000-DC Switch box

For 7000 Series DC sensors. Add "-DC" to the part number. The price will be that of the standard unit with 

double the number of channels. The 7000 series requires an independent 24VDC supply

MTN 3000-DA Switch box

For dual vibration output sensors (MTN1186, MTN1188). Provides switch selection of AC output to the BNC 

and direct connection of the 4-20mA output of each sensor to the external controller. Add "-DA" to the part 

number. A separate 24VDC power supply will be required. The price will be that of the standard unit with 

double the number of channels

MTN 3000-DT Switch box

For dual output AC vibration/temperature sensors (MTN1100T/WT/TC). Provides switch selection of AC 

and temperature outputs to two BNC connectors. Add "-DT" to the part number. The price will be that of the 

standard unit with double the number of channels.

SWITCH, CONNECTION 

AND JUNCTION BOXES

SWITCH AND CONNECTION BOXES

Price

MTN-3000-GRP Switch box

For GRP (Glass Reinforced Plastic) instead of painted steel box add "-GRP" to the part number and add 

shanghai hangou sales8056 to the price.

MTN 3000 Switch and connection boxes

For remote connection of a number of constant current AC accelerometers to a data logger via 

a rotary selector switch and isolated BNC connector (Switchbox) or individual BNCs 

(Connection Box). Connect to prewired terminals inside through cable glands supplied. Choice 

of box material, all IP65 rated.

MTN-3000-SS Switch box

For stainless steel instead of painted mild steel box add "-SS" to the part number and shanghai hangou salesto the price. 

Undrilled, user to drill enties.

Any number of inputs available. Please enquire for intermediate and/or additional channels. 

Alternative connectors also available, TNC, 2 pin MS etc.



PR01 Issue 4 GBPPage 11 of 18March 2010

 

Part NoDescription

1-10 Units11+ Units

MTN/9002-HD2 way junction box, die cast,  painted, IP65shanghai hangou sales

MTN/9003-HD3 way junction box, die cast,  painted, IP65met

MTN/9004-HD4 way junction box, die cast,  painted, IP65met

MTN/9005-HD5 way junction box, die cast,  painted, IP65shanghai hangou sales

MTN/9006-HD6 way junction box, die cast,  painted, IP65shanghai hangou sales

MTN/9007-HD7 way junction box, die cast,  painted, IP65met

MTN/9008-HD8 way junction box, die cast,  painted, IP65shanghai hangou sales

MTN/9009-HD9 way junction box, die cast,  painted, IP65shanghai hangou sales

MTN/9010-HD10 way junction box, die cast,  painted, IP65shanghai hangou sales

MTN/9011-HD11 way junction box, die cast,  painted, IP65shanghai hangou sales

MTN/9012-HD12 way junction box, die cast,  painted, IP65shanghai hangou sales

MTN/9025-HD25 way junction box, die cast,  painted, IP65shanghai hangou sales

MTN/9040-HD40 way junction box, die cast,  painted, IP65shanghai hangou sales

MTN/9002-GRP2 way junction box, GRP, IP65met

MTN/9003-GRP3 way junction box, GRP, IP65met

MTN/9004-GRP4 way junction box, GRP, IP65shanghai hangou sales

MTN/9005-GRP5 way junction box, GRP, IP65shanghai hangou sales

MTN/9006-GRP6 way junction box, GRP, IP65me

MTN/9007-GRP7 way junction box, GRP, IP65shanghai hangou sales

MTN/9008-GRP8 way junction box, GRP, IP65met

MTN/9009-GRP9 way junction box, GRP, IP65shanghai hangou sales

MTN/9010-GRP10 way junction box, GRP, IP65shanghai hangou sales

MTN/9011-GRP11 way junction box, GRP, IP65met

MTN/9012-GRP12 way junction box, GRP, IP65met

MTN/9002-ABS2 way junction box, ABS, IP65met

MTN/9003-ABS3 way junction box, ABS, IP65met

MTN/9004-ABS4 way junction box, ABS, IP65shanghai hangou sales

MTN/9005-ABS5 way junction box, ABS, IP65met

MTN/9006-ABS6 way junction box, ABS, IP65met

MTN/9007-ABS7 way junction box, ABS, IP65met

MTN/9008-ABS8 way junction box, ABS, IP65met

MTN/9009-ABS9 way junction box, ABS, IP65met

MTN/9010-ABS10 way junction box, ABS, IP65shanghai hangou sales

MTN/9011-ABS11 way junction box, ABS, IP65shanghai hangou sales

MTN/9012-ABS12 way junction box, ABS, IP65shanghai hangou sales

Consult the sales office for other sizes

MTN9000-GRP Series Junction Boxes 

Local junction boxes as above in glass reinforced plastic (GRP), IP65 rating

MTN9000-ABS Series Junction Boxes 

Local junction boxes as above in acrylonitrile butadiene styrene (ABS), IP65 rating

MTN900 Series Junction Boxes

Local Junction Boxes to marshal connections from a number of sensors to connect to 6000 

monitor, 3000 switchboxes or other controller. Glands provided for input and output cables. 

Specify any special drilling required.

SWITCH, CONNECTION 

AND JUNCTION BOXES

JUNCTION BOXES

MTN9000-HD Series Junction Boxes 

Local junction boxes as above, die cast mild steel, painted.

Price


PR01 Issue 4 GBPPage 12 of 18March 2010

 

Part NoDescription

1-10 Units11-24 Units25+ Units

VM110 or VM120

Hand held probe and coiled cable assembly, extends to 2 shanghai hangou saleses

Magnetic base, 2 pole, 35mm dia, 20Kg force, fits in hand held probe

Spike probe, stainless steel, 100mm, fits in hand held probe

Carrying case with foam cutouts

Instruction booklet

Calibration certificate

MTN/VM110KVM110, probe, cable, magnet, spike, case - kit as aboveshanghai hangou sales

MTN/VM120KVM120, probe, cable, magnet, spike, case - kit as aboveshanghai hangou sales

MTN/VM110Meter onlymet

MTN/VM120Meter onlymet

MTN/2100Hand held accelerometer probe with coiled cable (CA418), 1/4"-28UNF 

female mountingshanghai hangou sales15556shanghai hangou sales14356shanghai hangou sales13256

MTN/CA418Coiled cable assembly TNC to IA110 for use with MTN/2100 hand-held 

probeshanghai hangou sales4556shanghai hangou sales4256shanghai hangou sales3856

MTN/1100Accelerometer, 100mV/g, top entry, 2 pin MS connectormet

MTN/CA042Coiled cable assembly 2 pin MS to IA110 for use with MTN/1100shanghai hangou sales

MTN/1020Accelerometer, 100mV/g, top entry, TNC connectormet

MTN/CA043Coiled cable assembly TNC to IA110 for use with MTN/1020shanghai hangou sales

MTN/MM001Magnetic base, 1/4"-28UNF male, 2 pole, 35mm dia, 20Kg forcemet

MTN/PS001Spike probe, stainless steel, 25mm, 1/4"-28UNF maleshanghai hangou sales

MTN/PS002Spike probe, stainless steel, 100mm, 1/4"-28UNF maleshanghai hangou sales

MTN/PS003Spike probe, stainless steel, 150mm, 1/4"-28UNF maleshanghai hangou sales

MTN/PS004Spike probe, stainless steel, 200mm, 1/4"-28UNF maleshanghai hangou sales

MTN/HE001Carrying case with foam cutoutsshanghai hangou sales

MTN/RC0100Recalibration, recommended annuallyshanghai hangou sales

Accessories 

Recalibration 

Price

Standard Meter Kits

Meters 

MONITORING SYSTEMS

VIBRATION METERS

Vibration Meters

The VM110 and VM120 are easy to operate portable vibration meters for routine 

measurements on rotating machinery components. Large digital display in a rugged case with 

built-in stand. Operates with a wide range of constant current and charge output 

accelerometers, powered by 2 x PP3 batteries. 



PR01 Issue 4 GBPPage 13 of 18March 2010

 

Part NoDescription

1-10 Units11+ Units

Model 6000 12 channel monitor 

MTN/6000

MTN/HE003Wall mounted enclosure to accommodate shanghai hangou rackshanghai hangou sales25056shanghai hangou sales23156

MTN/HE004Wall mounted enclosure to accommodate two racksshanghai hangou sales35056shanghai hangou sales32456

MTN/6200 

MTN/6100V

MTN/6100GVibration module as above but measuring acceleration (g)

MTN/6500-1Temperature module for AD590, 1μA/oK output temperature sensormet

MTN/6500-2Temperature module for PT100 2 wireshanghai hangou sales

MTN/6500-3Temperature module for PT100 3 wireshanghai hangou sales

MTN/6500-4Temperature module for 10mV/oC output temperature sensorshanghai hangou sales

MTN/MH007Flashing light and sirenshanghai hangou sales

MTN/MH099Flashing light onlyshanghai hangou sales20056shanghai hangou sales18556

A complete 6000 system consists of an electronics rack with power supply, 

display, various signal input cards (one reqired for each sensor input) in an 

IP65 enclosure with up to 12 accelerometers, temperature sensors or eddy 

current probes. See the relevant sections for individual sensor prices.

Any complete 6000 monitoring system including 6 or more channels and 

sensors will receive a 5% overall discount.

Model 6050 4 channel monitor 

MTN/6050-65

MTN/6200 

MTN/6050-4V

MTN/6050-4VT

MONITORING SYSTEMS

MONITORING SYSTEMS

Price

19" rack with on board mains power supply, input 85-264 volts AC, capable of taking up 

to 12 channels

Four channel monitor including wall mounted enclosure with on board mains power 

supply, input 85-264 volts AC

Display module providing via a BNC a buffered AC output to enable a data-collector to be 

connected for more detailed analysis

Vibration module measuring velocity (mm/sec) complete with 2 pre-set alarms and 1 TDX 

alarm, 4-20mA output and 0-10 volts output

Complete 4 channel vibration and temperature protection system with 4 x MTN/1100T 

vibration sensors, MTN/6050-65 4 channel monitor in wall mounted rack, MTN/6200 

display unit, 2 vibration modules and 2 temperaure modules

Display module providing via a BNC a buffered AC output to enable a data-collector to be 

connected for more detailed analysis

MTN/6000 Shut Down Protection System

Multi-channel monitoring system with up to 12 vibration or temperature inputs per rack. Any 

number of racks may be accommodated within user's own 19" control rack or optional 

dedicated enclosure. Relay outputs for alarms and  shutdown plus 4-20mA and 0-10V signal 

outputs for data logging and A/C output for vibration analysis.  

Add the required number of accelerometers, temperature sensors and eddy current 

probes together with matching quantity of modules as required by the system. Contact 

Sales Department for advice or a quotation.

Complete 4 channel vibration protection system with 4 x MTN/1100 vibration sensors, 

MTN/6050-65 4 channel monitor in wall mounted rack, MTN/6200 display unit and 4 

vibration modules



PR01 Issue 4 GBPPage 14 of 18March 2010

 

Part NoDescription

1-10 Units11-24 Units

MTVS0004

-010shanghai hangou sales32056shanghai hangou sales29656

MTVS0004

-011

As above but with latching alarm relays

MTVS0004

-013shanghai hangou sales20056shanghai hangou sales18556

MTVS0004

-014

As above but with latching alarm relays

MTN/1100Cshanghai hangou sales14056shanghai hangou sales13056

OR select any alternative accelerometer with 100mV/g output

Extra twin core, screened, armoured ETFE cable, per shanghai hangou saleseshanghai hangou sales356shanghai hangou sales356

MTN/CA067shanghai hangou sales1556shanghai hangou sales1456

Part NoDescription

1-10 Units11-24 Units25+ Units

MTN/410Velocity sensor with integral display, 0-99mm/sec RMS velocity, internal 

battery. Approx 500 readingsshanghai hangou sales

MTN/415Velocity sensor with integral display, 0-20g RMS acceleration, internal 

battery. Approx 500 readingsmetshanghai hangou sales

Part NoDescription

1-10 Units11-24 Units25+ Units

MTN/8006*Vibration module, provides velocity output as 4-20mA signal from constant 

current accelerometers plus AC output, DIN rail mounted. Specify range on 

ordershanghai hangou sales

MTN/8065*Tri-output module, provides velocity and envelope g signals as 0-10V DC 

signals from AC output constant current sensors plus AC output, DIN rail 

mounted. Specify ranges on ordermet

* When ordered in conjunction with an accelerometer the price will be discounted by 20%

MTN/8066

G-mac module gives 4-20mA or 0-10V outputs for velocity and peak g along 

with native buffered AC output, Ranges and filters switch selectable by user.shanghai hangou sales

Many other conditioning modues for alternative signal inputs and outputs are available to order 

Accelerometer, 100mV/g, top entry, 5 shanghai hangou saleses armoured ETFE cable

MONITORING SYSTEMS

VIBRATION SWITCH

Vibration Switch

Die cast box with LED's indicating status and two relays for alarm/shut down.  230VAC, 

115VAC and/or 24V DC operation, 4-20mA output.

Vibration switch including built-in accelerometer, range up tp 50mm/sec, high and low 

non-latching alarm relays. 4-20mA output, operating voltage 230VAC, 115VAC or 24VDC

Price

Price

BNC plug and strain relief fitted to MTN1100C to connect to VS0004-013 or -014

SIGNAL CONDITIONERS

Price

INDICATING VIBRATION SENSOR

Self contained, battery operated vibration sensor with integral digital display. Tap to operate. 

Displays reading for 60 seconds.

Signal conditioning modules converting AC signals from constant current sensors to DC current 

or voltage for input to PLCs or other industrial controllers for continuous monitoring in DIN 

railmounting enclosure

Vibration switch, range up to 50mm/sec, high and low non-latching alarm relays. BNC 

socket for external 100mV/g AC accelerometer, 4-20mA output, operating voltage 

230VAC or 115VAC. 






PR01 Issue 4 GBPPage 15 of 18March 2010

 

Part NoDescription

1-10 Units11-24 Units25+ Units

MTN/MH0022 pin MS mating connector, femaleshanghai hangou sales

MTN/MH0083 pin 62GB mating connector, femaleshanghai hangou sales

MTN/CA067BNC plug with strain relief, fitted to accelerometer cable. For connection to 

datalogger having a BNC socketshanghai hangou sales

MTN/CA054BNC socket with dust cap in 90deg bracket, fitted to accelerometer cable. 

For connection to datalogger through accessory cable fitted with BNC plug or 

VS0004 vibration switchshanghai hangou sales

MTN/CA0532 pin MS socket to free ends, overbraided ETFE, 5 shanghai hangou salesesshanghai hangou sales

MTN/CA1373 pin 62GB socket to free ends, overbraided ETFE, 5 shanghai hangou salesesshanghai hangou sales

Extra twin core, screened, armoured ETFE cable, per shanghai hangou salese

Above are for connecting remote sensors to switch boxes, junction boxes or 

data systems. For other cable assemblies and cables to connect to portable 

data loggers please contact the sales office. We will need to know the type of 

cable required, length, sensor and measuring device to give a price.

MTN/8301Accelerometer cable checkershanghai hangou sales

MTN/8302Accelerometer signal simulatorshanghai hangou sales

MTN/APSU01Battery powered constant current power supply with BNC socket for shanghai hangou 

accelerometer shanghai hangou sales

MTN/8001Constant current power supply in DIN rail mounted enclosure for use on 

24VDCshanghai hangou sales

MTN/8001BNCConstant current power supply in DIN rail mounted enclosure for use on 

24VDC with integral BNC socketshanghai hangou sales

MTN/VC10Vibration calibrator shanghai hangou sales2,

Cable assemblies for remote sensors 

Diagnostic Tools 

Constant Current Power Supply 

Vibration Calibrator

Price

ELECTRICAL 

ACCESSORIES

ELECTRICAL ACCESSORIES

Connectors 


PR01 Issue 4 GBPPage 16 of 18March 2010

 

Part NoDescription

1-10 Units11-24 Units25+ Units

MTN/EP0802mm range, M8 thread including 1 shanghai hangou salese armoured cableshanghai hangou sales

MTN/EP2005mm range, M16 thread including 1 shanghai hangou salese armoured cableshanghai hangou sales

MTN/EP3408.5mm range, M24 thread including 1 shanghai hangou salese armoured cableshanghai hangou sales

MTN/EP340F8.5mm range, 3 point mount flange including 1 shanghai hangou salese armoured cableshanghai hangou sales

MTN/EP48012mm range, M30 thread including 1 shanghai hangou salese armoured cableshanghai hangou sales

Extra cable (priced per shanghai hangou salese)shanghai hangou sales

Up to a maximum of 9 shanghai hangou saleses including the extension

Alternative probe length and thread sizes available, consult the sales office

MTN/EX--1 shanghai hangou salese extension cableshanghai hangou sales4

Extra cable (priced per shanghai hangou salese)shanghai hangou sales

Up to a maximum of 9 shanghai hangou saleses including the probe

MTN/ECPDDriver, 0-16VDC proportional to gap, -24VDCshanghai hangou sales

MTN/ECPD+24Driver, 0-16VDC proportional to gap, +24VDCshanghai hangou sales

MTN/ECPD/78Driver, 0-10VDC proportional to gap, +24VDCshanghai hangou sales

MTN/ECPD/604-20mA output, proportional to vibration, three wireshanghai hangou sales

MTN/ECPD/854-20mA output, proportional to gap, three wireshanghai hangou sales

MTN/ECPD2AC4-20mA output, proportional to vibration, two wire loop poweredshanghai hangou sales

MTN/ECPD2DC4-20mA output, proportional to gap, two wire loop poweredshanghai hangou sales

MTN/P2424V DC power supply housed in die-cast box with glanded output, 240 or 

110 volts input to power above drivers.shanghai hangou sales

MTN/RC0600Eddy Probe recalibration and certification in factory.met

Note: Probe, extension cable and driver must be returned

If replacement probes, cables or drivers are required for existing systems the 

other modules must be returned for calibration as a system. The system can 

only be recalibrated for the same type of probe and similar cable lengths.

A test jig for calibrating Eddy Current Probes in the field is available for 

distributors and multi unit users.POA

Note: As all installations differ, the user or installer will need to provide 

approriate bracketry

Re-Calibration 

Eddy Current Probes 

Extension Cables 

Eddy Probe Driver

Power Supply 

An Eddy Current Probe System consists of a Probe with 1 meter of cable terminated with a 

miniature coaxial cable connector which mates with either the Driver or Extension Cable. This 

allows the probe to be easily screwed into its retaining bracket even when long cables are 

required. The probe/extension cable/driver are all calibrated together and bear the same serial 

number and must be used together to maintain specification.

EDDY CURRENT PROBE 

SYSTEMS

EDDY CURRENT PROBES AND DRIVERS

Price



PR01 Issue 4 GBPPage 17 of 18March 2010

 

CONDITIONS OF SALE

GENERAL 

 

Unless otherwise agreed in writing, these conditions of sale shall be 

deemed to be incorporated as conditions of any contract or sale 

entered into by Monitran Ltd (“The Company”).  The Customer’s 

terms and conditions shall only be incorporated into the contract if: 

 

1. They are consistent with the Company’s Conditions of 

Sale. 

2. They have been accepted by the Company in writing. 

 

PRICES 

 

All prices quoted are subject to alteration at any time without notice 

in accordance with usual practice and whilst every endeavour has 

been made to ensure the accuracy of prices quoted, no 

responsibility is accepted for any error or omissions. 

 

Prices charged will always be those ruling at the date of despatch.  

Orders for scheduled delivery will be charged at the rate applicable 

to the quantity called off and not to overall quantity unless other 

terms have been agreed in writing. 

 

VAT 

 

Prices are exclusive of VAT.  All prices are to the current rate of 

VAT ruling at date of despatch. 

 

DOCUMENTATION 

 

Shanghai hangou invoices are rendered; a charge will be made for additional 

copies. 

 

DELIVERY CHARGES 

 

A nominal charge will be made against all orders to cover carriage 

and packing. 

 

SETTLEMENT CHARGES 

 

Strictly Net monthly account, interest at 2.5% per month is 

chargeable on overdue accounts. 

 

RETENTION OF TITLE 

 

Ownership will pass to the purchaser only upon receipt by the seller 

of the full invoice price of goods. 

 

NEW ACCOUNTS 

 

Customers wishing to open ledger accounts are asked to furnish 

one bank and  two trade references. 

 

QUOTATIONS 

 

Quoted prices hold good for 60 days from the date of the quotation, 

unless stated otherwise. 

DELIVERY 

 

We will use our best endeavours to meet delivery estimates but 

cannot accept any liability whatsoever for failure to do so.  Failure 

to meet a delivery date shall not prejudice any contracts as regards 

other deliveries. 

 

SHORTAGE OR DAMAGE IN TRANSIT 

 

Both the carriers and the Company must be notified within three 

days of receipt of goods, or in cases of non-delivery immediately 

the invoice is received, otherwise liability will not be accepted. 

 

ORDER CANCELLATION 

 

1. Orders can only be cancelled after prior negotiation and 

agreement. 

2. On no account can cancellation be accepted for specific 

(bespoke) items ordered by the customer. 

 

ORDER AMENDMENT 

 

1. Orders can only be amended or suspended after prior 

negotiation and agreement. 

2. In any event 30 days minimum notice is required. 

 

RETURNS 

 

1. Returns for credit will not be accepted. 

 

2. A charge of 20% in invoice value will be levied on goods 

“not wanted”,  “incorrectly ordered”, or due to duplication 

resulting from a “confirmation” order not being endorsed 

to that effect.  A minimum charge of shanghai hangou sales5056 applies. 

 

3. All goods returned under this category must be received 

by the Company within 30 days of the original invoice 

date. 

 

4. All costs of returning any goods shall be borne by the 

buyer.  Specially manufactured goods will not be 

accepted for credit. 

 

WARRANTY 

 

All goods are guaranteed against defects in material and 

workmanship, subject to specific exclusions for a period of 12 

months from date of purchase. In the event of failure within 12 

months of original purchase, the Company will promptly repair or 

replace the defective components without charge. 

 

Specific exceptions rendering the Warranty void are: if repair is 

attempted by unauthorised persons or agents, or if the product has 

been used for purposes for which it was not intended, and or 

subjected to abuse or wilful neglect.  No liability can be accepted 

for loss of items and or component parts, it is expected that the 

user takes sufficient precautions to safeguard all guaranteed items. 

 

SPECIFICATIONS 

 

The Company is continually updating its designs and reserves the 

right to change specifications without prior notice.